PE PVC Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwara
Cikakken Bayani
Cikakken bayanin injin bututun filastik guda ɗaya
1, Material ga guda bango corrugated bututu da corrugated tube:
Wannan samar line za a iya amfani da su samar da corrugated bututu na PE, PP, PVC, EVA ci gaba, kazalika da PA corrugated bututu.
2, Aikace-aikacen bangon bango guda ɗaya da bututu mai lalata:
Filastik guda-bango corrugated bututu da gashinsa na high zafin jiki juriya, resistant zuwa lalata da abrasion, high tsanani, mai kyau sassauci, etc.They ana amfani da ko'ina a cikin filayen auto waya, lantarki thread-wuce bututu, kewaye na inji kayan aiki, kariya bututu. na fitulu da lantern waya, bututu na kwandishan da na'ura wanki, da dai sauransu.
3, Abũbuwan amfãni daga cikin guda-bango corrugated bututu inji (na'urar for corrugated tube):
Wannan samar da layi tare da mai kyau yi da m farashin, shi zai zama mafi kyau zabi for your samar da guda-bango corrugated bututu.
| roba guda bango corrugated bututu injiJerin inji | Yawan |
| SJ65/30 guda dunƙule extruder tare da auto feeder da bushewa hopper | 1 saiti |
| Mutu kai | 1 saiti |
| Mold: 72/90 nau'i-nau'i na tubalan mold | bisa ga bukatun abokin ciniki |
| Cire waya da saka na'ura | 1 saiti |
| Injin kafa: tare da sanyaya ruwa | 1 saiti |
| na'ura mai jujjuya tasha biyu | 1 saiti |
| Tsarin kula da wutar lantarki | 1 saiti |
| Kayan kayan abinci | 1 saiti |
Hotunan Gilashin Bututun Wutar Lantarki Mai Lantarki Guda Daya:
1. Extruder:
Yafi amfani da SJ-45 extruder ko SJ-65 extruder, wanda zai iya ci gaba da m fitarwa da ajiye makamashi.SJ-45 extruder don yin 9-32mm diamita corrugated bututu, da kuma SJ-65 extruder don yin 32-110mm.L/D na iya bambanta bisa ga kayan ku da fitarwa daban-daban.
2. Na'urar gyare-gyaren Bututu:
Ana amfani da wannan injin ɗin don siffanta bututun da aka lalata.Za a iya cire mold kuma canza.Corrugated bututu diamita ne yanke shawarar da mold, don haka idan kana so ka aiwatar daban-daban diamita, ya kamata ka canza differnet mold.Our factory kuma iya samar maka da mold.
3. Na'urar Coiling / Na'ura mai iska:
Ana amfani da wannan na'ura don jujjuya ciki da kuma tattara bututun da aka lalata.Tare da tsarin sarrafa wutar lantarki yana iya sarrafa saurin jujjuyawa daidai.Kuma yana iya sarrafa girman reling.Ya dace sosai don fitarwa.Hakanan ana amfani da wannan injin a cikin sauran layin yin bututu mai laushi.
| Abu | Bayani | Naúrar | SJ65/30 |
|
| |||
| 1 | Diamita na dunƙule | mm | 65 |
| 2 | L: D |
| 30:1 |
| 3 | Ƙarfin mota | KW | AC30 |
| 4 | Motar Brand |
| Siemens |
| 5 | Yanayin daidaita saurin mota |
| Juyawa akai-akai |
| 6 | Inverter |
| ABB |
| 8 | Fitowar fitarwa | Kg/h | 50-75 |
| 9 | Material na dunƙule da ganga |
| 38CrMoAlA, Nitrogen maganin |
| 10 | Zurfin Nitrogen | mm | 0.5-0.8 |
| 11 | Ƙarfin zafi | KW | 4 yanki, 14kw |
| 12 | Ƙarfin sanyi | KW | Yankuna 4, 250w×4 |
| 13 | Akwatin Gear |
| Hard gear surface, ƙananan ƙirar ƙira |
| 14 | PLC tabawa: Siemens, girman allo: 10inci | ||
| 15 | Mai tuntuɓar juna |
| Schneider |
Mutu shugaban & kafa inji & kafa mold
| Mutu kai
| ||
| 1 | Mutu kayan kai | 40Cr |
| 2 | Tsarin ciki | Nau'in karkace |
| 3 | Mitar matsa lamba | Yi kayan aiki tare da na'urar matsa lamba don saka idanu da narkewar a cikin shugaban mutu |
| Ƙirƙirar inji & kafa mold
| ||
| 1 | Material na kafa mold | 40Cr, sinadarin nitrogen |
| 2 | Samar da mold | 7sets don Φ16, Φ20, Φ25, Φ32, Φ40, Φ50, Φ63 |
| 3 | Yawan mold block | 60 nau'i-nau'i (4 nau'i-nau'i azaman kayan gyara ga kowane girman) |
| 4 | Nau'in na'ura mai ƙira | Nau'in kwance |
| 5 | Samar da mold motsi hanya | Da'irar |
| 6 | Fitar da wutar lantarki | 4 kw |
| 7 | Inverter | ABB |
| 8 | Hanya mai sanyaya | Sanyaya iska |
| 9 | Ikon busawa | 180w×5 |
Biyu faifan winder
| Abu | Bayani | Naúrar | Saukewa: SPS63 |
 | |||
| 1 | Mirgine diamita | mm | 400mm |
| 2 | Gudun iska | / | 0.5-12m/min |
| 3 | Matsakaicin diamita na iska | 2.2m | |
| 4 | Faɗin iska | / | 0.4-0.6m |
| 5 | Kewayon bututu | m/min | 16-63 mm |
| 6 | Na'urar sauya bututu ta atomatik | mm | Y132S-4 |
| 7 | Matsin iska | 0.3-0.6Mpa | |
| 8 | Yanayin fitar da bututu | / | Turin huhu |
Aikace-aikace
1. Bututun bututun waya na lantarki
2. Bututun igiyar waya ta mota
3. Shisha hookah bututu
4. Injin wanki magudanar ruwa
5. bututun fitar da kwandishan
6. Likitan numfashi bututu
7. Bututun haɓakawa
